Kwick Stage System  
     
 
KwikStage system is also known as kwikform, it is a modular system scaffold wth wedge fixing all access scaffold requirements. The wedge fixing of the ledgers and transoms gives a simple and fast means of erecting access scaffolding without loose parts, its rigid 4 way fixing giving a positive location without movement, spigot and wedge fitting on the standar to give guaranteed vertical alignment.
 
     
 
Kwik Stage Components
 
     
     
 
KwikStage Standards / Verticals  

It form the support or the uprights and are made from Standard Scaffold Tubes of 48.3 X 4 mm thick. They have a series of "V" Pressed welded at nominal 495 mm on the tube to provide a location for ledger and transoms.

   
Kwik Stage / Quickwedge Ledgers  

These items are made from tube with a cast wedge-fixing device at each ends. These are used to tie in the uprights or standards longitudtinally.


   
Kwik Stage Transoms  
They are a rolled "T" section with wedge fixing device on each ends. Also available with back to back angles of 50 X 50 X 5 mm to form a "T" These transoms engaged with "V" pressing.
   
Kwik Stage Board Brackets  
The One, Two and Three Board Stage Brackets enables an additional 255 mm, 450 mm and 675 mm platform respectively to be provided on the inside of the Scaffold nearset the building.
   
Kwik Stage Tie Bar
A length of 38 mm X 38 mm angle iron with a dowl at both ends. Used to connect stage brackets together.
   
Kwik Stage Face Brace
 
Diagonal Brace has pivoting cative wedge fittings welded to each end, which locate the "V" pressing on the standards. Used to form facad bracing. All sizes are available.
   
Kwik Stage Accessories
   
Guiding Pin
U-Clip
V-Pressings
Wedge
   
Kwick Stage System Product Details & Users Manuals